What are the main load-bearing mechanisms of lifting machinery?
Author: Dongpu Lifting Machinery
The primary load-bearing components of a crane include the hoisting mechanism, the traveling trolley, and the main girder. The stress conditions vary among these components depending on the type of crane. Below, we will examine the composition and operating principles of these load‑bearing systems:
The primary load-bearing components of a crane include the hoisting mechanism, the traveling trolley, and the main girder. The stress conditions vary among these components depending on the type of crane. Below, we will examine the composition and operating principles of these load‑bearing mechanisms.
I. Lifting Mechanism
The hoisting mechanism consists of several components, including a hydraulic motor, a reducer, a drum, wire ropes, and a pulley block. The hydraulic motor provides the power required for the hoisting system and serves as its primary power source. The reducer lowers the rotational speed of the hydraulic motor, ensuring smooth operation and preventing excessive or abrupt movements. The drum enables orderly winding and unwinding of the wire rope, allowing it to be both reeled in and extended as needed.
During operation of the hoisting mechanism, the hydraulic motor transmits power through a reducer; the reducer’s low-speed shaft winds or unwinds the wire rope on the drum. Via a pulley block, this motion drives the hoisting mechanism to perform lifting and lowering movements. The direction of the hoisting mechanism’s vertical movement is determined by the motor’s rotation; a ratchet-type brake enables controlled stopping of the motor.
II. Telescopic Boom
The telescopic boom is one of the primary load-bearing components of a truck-mounted crane, and its luffing motion is achieved by varying the performance of hydraulic cylinders. The loads acting on the telescopic boom include the lifting load, the boom’s own weight, inertial forces during slewing, and aerodynamic drag caused by wind.
When analyzing the stress conditions of a telescopic boom, the boom’s self-weight can be treated either as uniformly distributed along the boom or as concentrated at the center of gravity, located between the root hinge and the tip. During outdoor operations—particularly with cranes equipped with long telescopic booms—the wind loads can be substantial. For practical analysis, it is generally assumed that the wind load acts only on the side and rear surfaces of the boom.
Previous:
Latest News
What are the main load-bearing mechanisms of lifting machinery?
Construction machinery is evolving toward greater environmental sustainability and digitalization.